 |
|
 |
ElectricScooterParts.com Support Center
How can we help you today?
How to add an extra battery to a Razor Ecosmart Metro with a switch.
ESP Support
With a switch that changes the battery pack from 36 to 48 Volts, the Voltages between the 36 Volt pack and the additional 12 Volt battery will become unbalanced and if charged with a 48 Volt battery charger the batteries will be damaged due to overcharging and undercharging of the different batteries in the pack. A solution to this is to use a 36 Volt charger and a 12 Volt charger to recharge the four batteries. Here is a wiring diagram for this method:
The method above is the hard way to accomplish your goal and there is a much easier method which is to install a throttle top speed limiter with a defeat switch. Here is a photo of a throttle top speed limiter:
This part goes between the throttle and controller and then a switch connects to it to defeat the lower top speed that can be adjusted from 0-100% and anywhere in between by using a small screwdriver.
The top speed limiter shown above does not have the right connectors on it for a Razor Ecosmart scooter's throttle, however, we could make one that does. The defeat switch connects to the top speed adjuster's black and orange wires.
With the top speed limiter installed a 48 Volt charger can be used to recharge the battery pack and the top speed can be adjusted to any level that you want and then defeated with a switch when you want the scooter to have full power. The defeat switch could even be a key switch to prevent unauthorized or accidental use at full power.
Please let us know if you have any questions.
Thank you very much for your response. I would be very interested in purchasing a top speed limiter that would be modified with connectors to use with the Ecosmart Metro. I would also purchase the 48 volt charger to go with it. Can you explain how to use the switch you mentioned to use it at full power? Please let me know how much the modified top speed limiter will be and how to place that order and I will do it as soon as I get the info. Thank you very much!.
ESP Support
The top speed limiter is $9.95. We will make a link to one that is plug-and-play with the EcoSmart scooter right now and reply again with a link to it.
The switch that works with the limiter allows the limiter to function in limited speed range mode when the switch is off and in normal full speed range mode when the switch is on.
We could include a switch that plugs into the limiter if you could let us know our part number of the switch you would like to use and how long the wires between the switch and limiter need to be.
ESP Support
The plug-and-play top speed adjuster with defeat switch connector for the Razor EcoSmart electric scooter is now made and it is our item # ESM-ADJUSTER.
Here is the link to the page it can be purchased on:
https://cart.electricscooterparts.com/top-speed-adjustable-limiter-for-razor-ecosmart-scooter
Thank you so much for the help. I was thinking of using the handlebar on/off switch item # SWT-2. The wires would have to reach from the bar to the back of the battery compartment, I can put connectors on the wires or if you want to let me know which connector I need to buy to make it work perfectly I will purchase that as well. Again thank you for everything! I cant wait to put it all together.
ESP Support
Our SWT-23 handlebar switch already has the right terminals on it to work with ESM-ADJUSTER so all that would need to be purchased with it is a CNX-W2.8FH-2T Connector Housing.
SWT-23 has a 65" long cable and if that is not long enough then we carry extension cables for it on our Extension Cables page.
ESP Support
On/On switches are commonly available in SPDT and DPDT configurations which have three or six terminals. If you search for DPDT On/On switch they can be found with six terminals which can be wired as the diagram above shows.
The advantage of using an On/Off/On switch such as our item # SWT-154 is that because of its middle Off position it can be used as the power switch so a separate power switch is not needed in the circuit. I suppose that an On/Off/On switch would take a fraction of a second longer to switch from on to on than an On/On switch would take though.
ESP Support
It can not be done with an SPST switch because two throws are needed to complete the circuit. It could be done with an SPDT three-terminal switch, so long as it has a high enough current rating, by following the wiring diagram for the DPDT switch and omitting the jumper wires between the left side and right side terminals.
Steve Ling
I have an Ecosmart Metro that I want to add an extra battery to for the purpose of more speed. This will make the scooter 48 volts, however I have kids that ride my scooter from time to time and I am worried it will be too fast for them to safely ride. I want to use a switch so that I can use 36 volts for them and then switch it to 48 volts for me. I have seen this done on youtube but the video maker did not say how he wired it up. I have some wiring knowledge but have never done this particular thing. Can anyone post a wiring diagram for this application?