This forum is in read-only mode. Please continue to browse, but replies are disabled for now. Why?

Need help with 36V parts : Razor Dune Buggy

I just bought a new Razor dune buggy and I want to upgrade it to 36V for a upcoming Christmas present. So far all I've bought is a Currie 500w motor.


I need a controller, throttle with on/off switch built in & reverse switch. After looking at some parts on this site I need to know what parts work with each other before ordering them.


Controller:

SPD-361000B

Part Link: http://www.electricscooterparts.com/speedcontrollers36volt.html


Throttle:

THR-136, 137 or 138

Part Link: http://www.electricscooterparts.com/throttles36volt.html


If I choose one of those throttles above will it work as an on/off switch? In the link below supports says to use a different heavy duty on/off switch but that was a couple of years ago, maybe these throttles with on/off switch built in weren't available then, not sure I'm new to Razors?

See 1/4 down the page;

Wiring Link: http://support.electricscooterparts.com/support/discussions/topics/1000037315/page/1?url_locale=


Reverse Switch:

SWT-154

There are no specs? Will this work at 36V?

Part Link: http://www.electricscooterparts.com/powerswitches.html

Wiring Link: http://support.electricscooterparts.com/support/discussions/topics/1000070478



I think that's it for now. If there are better parts or if I have the wrong parts please let me know. Thanks in advance for any help!!!


In order to recommend compatible parts I need a little more information. Is the Currie motor a 24 Volt 500 Watt motor that you plan to overvolt and run at 36 Volts?

Sorry. I'll be using a 24V / 450W Currie motor. Below will be my setup;

Controller: SPD-361000B
Motor: Currie XYD-6B2 (24V / 450W)
Throttle:
THR-138
Battery w/ 36V charger: 3x-10ah OR 15ah - I'd like to fit all 3 in the stock battery location and get 40-45mins of run time. If both will fit approximately how much more run time will the 15ah get vs. the 10ah?
- The 10ah is 5-7/8" long x 2-1/2" wide x 4-5/16" high
- The 15ah is 6" long x 3-7/8" wide x 3-3/4" high

What amp per hour charger do you suggest?
https://www.electricscooterparts.com/36vchargers.html


Our CHR-36V1.6A 36 Volt 1.6 Amp charger will work great with either the 10Ah or 15Ah battery pack. For a faster charge our CHR-36V2.5A or CHR-36V3A charger could also be used.


Login or Signup to post a comment